This file is from a shared repository and may be used by other projects.
The description on its file description page there is shown below.
Summary
DescriptionBtty-Whitman-As-Designed.jpg
English: This is a plan of Battery Whitman dated 1897, from the U.S. Army Engineers. It shows the original design of the battery, with four mortar pits of four mortars each, in a rectangular array that was dubbed an "Abbot Quad," after the engineer who first drafted this design (in 1892) as a way of saturating an area with salvo fire from 16 coast defense mortars. In fact, this is one of eight early U.S. mortar batteries that were designed as Abbot Quads, including two of these "half quad" designs.
This plan was obtained by Thomas Vaughan, courtesy of Glen Williford, and published as part of his "Analysis of Seacoast Mortar Battery Design Types (1890-1925), Stoughton, MA, 27 February 2004, p. 21.
The plan is oriented toward the NNW (at top). The existing Btty Whitman Pit A is at lower left, and Pit B is at top left.
https://creativecommons.org/publicdomain/mark/1.0/PDMCreative Commons Public Domain Mark 1.0falsefalse
Original upload log
The original description page was here. All following user names refer to en.wikipedia.
Upload date | User | Bytes | Dimensions | Comment
2010-08-28 16:59 (UTC) | Pgrig | 137168 (bytes) | 800×587 | This is a plan of Battery Whitman dated 1897, from the U.S. Army Engineers. It shows the original design of the battery, with four mortar pits of four mortars each, in a rectangular array that was dubbed an "Abbot Quad," after the engineer who first draft
Captions
Add a one-line explanation of what this file represents
(Original text) : This is a plan of Battery Whitman dated 1897, from the U.S. Army Engineers. It shows the original design of the battery, with four mortar pits of four mortars each, in a rectangular array that was dubbed an "Abbot Quad," after the engine
File usage
There are no pages that use this file.
Metadata
This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.
If the file has been modified from its original state, some details may not fully reflect the modified file.